Molten-Salt Systems
High-temperature electrochemical research.
Integrated furnace-reactor systems configured for electrode access, atmosphere management, vacuum support, temperature control and cooling.
Explore molten-salt systems →
Research & Process Equipment
Configured around your process—not a catalogue number.
LINKX Industrial Solutions provides purpose-configured high-temperature, vacuum, atmosphere, deposition and electrochemical systems for universities, laboratories and industrial R&D.
We translate the research requirement into a practical equipment specification, then coordinate configuration, production, documentation, delivery and after-sales support.
Application-Led Engineering
From experimental objective to integrated research system.
Temperature alone does not define a furnace. The sample, process atmosphere, pressure, heating profile, chamber geometry, gas handling, cooling, instrumentation and laboratory environment all influence the final configuration.
LINKX coordinates those connected requirements through a single technical and commercial project pathway.
High TemperatureVacuum & AtmosphereElectrochemical ResearchCustom Integration
Primary Equipment Routes
Select the process family closest to your requirement.
Each route begins with a technical review. Final design, operating limits and accessories are confirmed against the approved specification.
Furnaces & Process Systems
Thermal processing across controlled environments.
Tube, box, rotary, fluidised-bed, atmosphere, vacuum, deposition and ultra-high-temperature system families.
Explore furnace systems →Capability visual. Final system arrangement depends on the approved process and safety specification.
Molten-Salt & Electrochemical Systems
Built around the reactor and experimental method.
LINKX coordinates high-temperature systems for molten-salt electrolysis and related electrochemical research. The configuration may combine the furnace, reactor, electrode access, atmosphere or vacuum equipment, cooling and process control.
Reactor configuration
Chamber dimensions, operating temperature, crucible arrangement, construction materials and sample capacity.
Electrode access
Custom lid arrangement, number and diameter of access ports, insulated rods, seals and instrument entry points.
Atmosphere & vacuum
Gas inlet and outlet routing, purge requirements, vacuum level, valves, flanges and compatible pumping equipment.
Cooling & control
Water chiller, temperature sensing, programmable heating profile, electrical requirements and safety interlocks.
Furnaces & Process Systems
Thermal systems for research, preparation and scale-up.
LINKX supports furnace selection and configuration across a wide range of material processes. Equipment is matched to the sample form, atmosphere, throughput, temperature profile and research objective.
Tube & multi-zone furnaces
Horizontal or vertical systems for controlled-atmosphere heating, gradients, rapid thermal processing and continuous or batch work.
Box, lift & debinding furnaces
Programmable systems for sintering, heat treatment, ceramic processes, burnout and general high-temperature research.
Rotary & fluidised-bed systems
Process configurations for powder movement, continuous treatment, calcination, coating and gas-solid interaction.
Vacuum & atmosphere furnaces
Systems for sintering, melting, purification, brazing, reduction and controlled-environment heat treatment.
Representative LINKX capability image; individual equipment is configured to the approved specification.
Equipment Portfolio
Connected systems for advanced materials research.
The following categories can be supplied individually or coordinated as part of a wider process system.
Tube & fluidised-bed furnaces
Single-zone, multi-zone, vertical, rotary, rapid-thermal, reciprocating and fluidised-bed configurations.
CVD, PECVD & ALD
Deposition and coating systems configured around the substrate, precursor, gas-flow, vacuum and thermal process.
Box & chamber furnaces
Box, muffle, pit, lift, debinding, microwave and process-specific chamber systems.
Atmosphere & reduction
Controlled-atmosphere, hydrogen-reduction and pressure-assisted systems with appropriate gas and safety controls.
Vacuum process furnaces
Vacuum sintering, melting, purification and brazing configurations for specialist material processes.
Ultra-high-temperature systems
Graphite, tungsten, induction and other specialist heating technologies selected against the process requirement.
Thermal analysis & testing
Thermogravimetric, expansion, thermal-cycling, temperature-field and heat-flow test configurations.
Material preparation equipment
Mixing, pressing, drying, gas delivery, vacuum, cooling, feed and sealing equipment supporting sample preparation.
Thermal components & consumables
Furnace tubes, flanges, valves, crucibles, thermocouples, refractory parts, seals and project-specific spares.
Technical Requirement
Information needed to configure your system.
If you do not yet have a complete specification, send the research objective and known process parameters. LINKX can structure the initial technical review with your team.
ProcessHeating, sintering, reduction, deposition, melting, electrochemistry or testing
MaterialSample composition, physical form, size, loading and compatibility considerations
TemperatureMaximum operating temperature, working range, ramp rate and programme profile
EnvironmentAir, inert, reactive gas, vacuum level, pressure and exhaust requirements
GeometryChamber, tube, reactor, crucible, access-port and sample-holder dimensions
FacilityElectrical supply, ventilation, water cooling, gas availability and installation space
ControlsData logging, alarms, programme storage, remote monitoring and integration needs
DeliveryDestination, schedule, documentation, training and commissioning expectations
Selected Project — In Production
High-temperature molten-salt electrolysis system for an Australian university.
LINKX is coordinating a purpose-configured furnace-reactor package for advanced molten-salt electrolysis research, combining temperature control, a customised access arrangement, vacuum equipment and water cooling.
- Technical requirement and configuration review
- Custom reactor-lid and electrode-access coordination
- Insulated corundum component for the stainless-steel basket rod
- Furnace, vacuum-pump and water-chiller package
- Production, freight, spare-parts and after-sales coordination
The university name and final project photographs should only be published with customer approval.
LINKX Project Pathway
From research requirement to delivered system.
Define
Capture the research objective, sample, process, environment and facility constraints.
Configure
Develop the system arrangement, principal equipment, accessories and interfaces.
Approve
Confirm technical specification, commercial scope, documentation and delivery plan.
Coordinate
Manage production communication, inspection, packaging, freight and project updates.
Support
Coordinate operating information, training, spare parts, warranty and after-sales needs.
Documentation & Support
A complete equipment project—not only a machine.
The exact documentation and support scope is confirmed before order placement and depends on the equipment, configuration and delivery destination.
Operating limits, utilities, site preparation and safety requirements must be reviewed against the final approved system and the customer’s institutional procedures.
- Approved technical specification and configuration record
- Utilities and site-preparation requirements
- Operating and maintenance documentation
- Inspection or factory-acceptance records, where agreed
- Packing, shipping and commercial documentation
- Recommended spare-parts and consumables list
- Warranty scope and after-sales contact pathway
- Remote or on-site support options, where agreed
Configure a Research System
Tell us what process you need to run.
Send the research objective, material, temperature, atmosphere or vacuum requirement, sample size, utilities, delivery location and preferred schedule. Our team will review the requirement and contact you.
LINKX Industrial Solutions Pty Ltd
Level 1, 63–73 Ann Street
Surry Hills NSW 2010, Australia
The LINKX UK
23A Buckingham Avenue
Slough, SL1 4QA, United Kingdom